Feiss VS2300_ Manuel d'utilisateur télécharger pdf

Assembly Instructions For

1 2

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before

assembly. Bulbs not included.

1. Install mounting plate :

A. Take supply wires from outlet box and

carefully pass them through center hole of

mounting plate. Note: The flat surface of

mounting plate must face the outlet box and

the angled rim side facing toward you.

B. Install mounting plate onto the outlet box

using two screws supplied with outlet box.

C. Spread electrical wires so that black wires

are on one side of the outlet box and the white

wires are on the other side.

2. Connect electrical wires :

A. Connect white fixture wire(s) to white

supply wire from outlet box with wire

connector. Connect black fixture wire(s) to

black supply wire from outlet box with wire

connector.

NOTE: Black outlet box wire may be red, round

and smooth and/or have copper conductor.

White outlet box wire may be square and

ridged and/or have a silver conductor.

B. Connect fixture ground wire (without plastic

insulation) to ground wire from outlet box

(usually with green insulation) with wire

connector.

Note: If there is no supply ground wire at

outlet box then attach fixture ground wire

securely onto green grounding screw located at

mounting plate.

IMPORTANT: Never connect ground wire to

black or white supply wires (from outlet box).

3. Install fixture plate. While carefully tucking all

electrical wires inside of fixture plate, install

the fixture plate onto the mounting plate by

fastening with set screw. Use an allen key to

tighten.

4. Install shade onto fitters by fastening with

counter ring.

5. Install light bulb (not included). See relamping

label at socket area for type and maximum

allowed wattage.

VS23001, VS23002, VS23003, VS23004

(E) 5/2012

Assembly Instructions For 1

Résumé du contenu

Page 1 - Assembly Instructions For

Assembly Instructions For4531 2IMPORTANTTURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOXBEFORE STARTING INSTALLATION Carefully unpack and i

Commentaires sur ces manuels

Pas de commentaire

Feiss VS2300_ Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Feiss VS2300_. Feiss VS2300_ User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Feiss VS2300_